Parts

Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. - Compatible with 12mm, 15mm and 20mm thru axles and QR - Machined 7075-T6 aluminum - Durable anodized finish - Torque to 40Nm - Not compatible with 6-bolt rotors and hubs - Washer included

Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. - Compatible with 12mm, 15mm and 20mm thru axles and QR - Machined 7075-T6 aluminum - Durable anodized finish - Torque to 40Nm - Not compatible with 6-bolt rotors and hubs - Washer included

T47 threaded BB cups for running 22/24mm spindle (SRAM) cranks in T47 frames. Cups have internal bearings and are typically used in BB shells with widths wider than 73mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, or a titanium-compatible anti-seize compound in titanium BB shells. - Bearings: Enduro Angular Contact (non-drive-side bearing: ABEC-3) - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width: 68mm – 132mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Over Bearing Width: 91.7mm in 86.5mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 48.5mm x 16-notch

#901 7/8 top 10" x 1" - Seat Post Diameter: 25.4mm - Seat Post Length: 15'' - Offset: 0mm - Clamp Type: Post mount - Seat Post Material: Steel

For optimal aerodynamic position. Genuine replacement parts Achieve your ultimate aerodynamic goals. - Bar only. Extensions, arm pads, and hardware not included - Accessories are available separately - UCI legal

Lighter weight option for Speed Concept. Genuine replacement parts Keep your bike looking fresh. - Only compatible with Speed Concept - Fixed head position

Integrates seamlessly into frame. Genuine replacement parts Keep your Speed Concept looking fresh. - Only compatible with Speed Concept - Flippable head

Original equipment integrated handlebar for Trek Madone SLR bikes. GENUINE REPLACEMENT PARTS Features KVF shaping and integrated design for unbelievable aerodynamics and stiffness. Variable radius, compact flare (VR-CF) shape offers wrist clearance in the drops. PRODUCT DETAILS - Not compatible with other bikes - 100% OCLV carbon fiber construction - Seamless integration with Blendr accessory bases and mounts, sold separately - For installation instructions, please see the Madone Assembly Manual

Get back on the road with a genuine replacement stem. Original equipment replacement stem for your Madone SLR. PRODUCT DETAILS - High fit stem is 7-degrees of drop - Not compatible with other bikes - For installation instructions, please see your Madone Assembly Manual

Get back on the road with genuine replacement parts. - Includes hardware and covers to allow for flush cut or exposed steerer - 3cm narrower at the hoods than in the drops - For optimal aerodynamic benefit - Only compatible with the Madone Gen 7

Original Equipment for front IsoSpeed. - Integrated design - Protects front IsoSpeed from elements

Integrates seamlessly into basebar/stem. - Only compatible with Speed Concept - Keeps a clean aesthetic

Integrates seamlessly into basebar/stem. - Only compatible with Speed Concept - Faceplate is directional

Integrates seamlessly into frame. - Only compatible with Speed Concept - Keeps a clean aesthetic

Genuine replacement parts Revive your ride with a fresh set of bearings for your BB90/95 equipped carbon bike. Proprietary replacement bottom bracket for the Trek family of bikes. - Only compatible with 24mm cranks - Not compatible with BB30 cranks

Allows use of two Blendr mounts on a Trek Madone SLR. Genuine replacement parts Mount light, computer, GPS and/or cameras to your top-of-the-line aero road bike. Product details - Blendr works with this simple formula: Stem + Base + Mount. Add accessory - Bases for use with the Trek Madone SLR Aero Integrated handlebar - Add any accessory mount (sold separately) for an elegant, integrated look - Includes mounting hardware

Optimize your aerodynamic position. - Only compatible with Speed Concept - For specific compatibility concerns, please contact our Customer Service team

- High Performance Brake Pads - Disc Pad Material: Organic

• Replacement for one-piece crank • Steel

- Plastic nylon molded body - Chromoly spindle - 318g pair

- Mountain-bike shifters built into linear pull-compatible brake levers - Aluminum - Left: triple chainring; Right: 7-speed - Cables and housing included

Sunlite's Adjustable Stem adjusts from 0 to +60 degrees so that you can place your handlebars wherever they are most comfortable. It boasts light and durable aluminum construction with steel bolts. It fits on 1- and 1 1/8-inch forks and accepts 25.4mm- and 31.8mm-diameter handlebars too, with included shims. Plus, its 2-bolt clamp makes changing bars easy and holds fast.

- Forged aluminum - 7/8-inch seat-clamp diameter - 165 grams

• Forged aluminum • Integrated micro-adjust seat clamp

• Quick-release seatpost clamp • Aluminum lever and cap with a 6mm chromoly bolt

• Shim available in various sizes • For use with 25.4mm or 27.2mm seatposts

- One-piece alloy body - Chromoly spindle - Toe clip compatible - Dual-sided design - 320g pair - 9/16-inch spindle

• Square taper interface • Only includes left crank

- Horizontal square interface - Only includes left crank

- Steel chainring with forged alloy crank arms and double chainguard - Compatible with 3/32" chains - 45mm chainline - Spindle Type: 118 SQR JIS