Parts & Accessories

The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level. - 32mm diameter clamping area for lights - Attaches with two M5 bolts and a steel backing plate - Mounts on left or right side

Blendr is the ultimate system for clean and easy integrated installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr MTB Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases) - Integrated tab securely holds brake and derailleur housing to reduce clutter on MTB bikes

The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

The Nip fender mount is a clean, simple solution to mount the Nip e-Bike headlight above the wheel. This lower position is great for commuting in foggy/rainy conditions or if you simply want fewer mounts on your handlebar. - Compatible with Nip e-Bike headlights

Flexible Versatite™ mount for Dash, Zot, Dart, Hotrod, Hotshot Micro 2W, Hotshot Pro 200 (flexible mount version; not for Hotshot Pro 200C) systems. Compatible with most handlebars, seat posts, and seat stays including aero styles.

Convert your Light & Motion Vis 360 (sold separately) into a head mount and use it wherever your non-helmet adventures may lead you. Excels as a running companion and great for bicycle touring as it transforms your Vis 360 into a camping headlamp.

Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series

The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.

Compatible with Shiner and Shiner Back lights - Rubber pad with loop straps to quickly mount and remove light for recharging - 50mm bolt spacing to fit most rear racks

An innovative cycle computer/action camera center mount, specifically designed for integrated stem/handlebar systems. Various mounting positions for Garmin Edge/Wahoo/Sigma GPS cycle computers and GoPro/Shimano sport cameras, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800 BT, and other GoPro-mount-compatible devices. - Compatible Devices: Garmin Edge / Wahoo / Sigma GPS bike computer / GoPro action cams and other devices with GoPro mount - Handlebar Compatibility: Shimano Pro Stealth, FSA Plasma, Ritchey WCS Solostream, SCOTT SYNCROS RR1.0 Carbon Aero 420, Most Talon, Canyon H31 & CP series - Material: aluminum / fiberglass composite - Max load: 220g - Weight: 40g (120mm) / 45g (150mm) - Dimensions: 12 x 3.5 x 3cm (120mm) / 15 x 3.5 x 3cm (150mm)

This mount is designed to securely attach your Light and Motion Vis 180 Micro taillight to your bicycle.

CatEye's Center Fork Bracket helps clear your handlebars by positioning your favorite CatEye headlight (sold separately) in front of your bike's head tube.

Take your Light & Motion headlight off your handlebars and along with you wherever the path may lead. Soft fabric and full adjustable sizing make for a comfortable fit.

- Fits 25.4-31.8mm handlebars - Compatible with Blaze, Beamers, 1200, 5000x and Super Spot

Strap Light & Motion's Vis 360 Spare Front Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.

Optional mounting bracket for the CatEye Rapid X, CatEye Rapid X2, and CatEye Rapid X3. Allows you to mount your Rapid to any of the CatEye tail light brackets.

Lezyne's Composite Bar Mount is a hard mount made of a reinforced Composite Matrix cradle for a strong and secure attachment of the Mega Drive, Deca Drive, and XL LED lights to the handlebar. It is designed for 25.4 mm or 31.8 mm bars, with the cradle designed to pivot 15 degrees laterally to allow adjustment of the LED light beam angle and directing it where it is most needed. A large thumb screw secures the CM mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine-tune fitting to undersized bars. Composite Bar Mounts are sold in a kit with the Mega Drive, Deca Drive, or XL LED lights.

Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.

- Rack mount bracket only - Fits TL-L225 taillight

Trek CHRGtime Charging Station offers a better way to charge your cycling electronics by eliminating cable clutter. MORE CHARGE. LESS CLUTTER. Trek CHRGtime Charging Station is a better way to charge all of your cycling accessories. Neatly charge up to six cycling lights, computers, and devices in a refined enclosure that tidies up your charging area and keeps the included USB and USB-C charging cables tucked away and hidden from view. PRODUCT DETAILS - A clean, organized charging solution for cycling electronics - Stores and charges up to six cycling electronics - Single outlet cord and hidden charging cables reduce clutter - Visible LED charging indicators make it quick and easy to see charge status - Escape port allows for external charging of phones, tablets, or other accessories - Removable divider tray allows for use with larger accessories - Included stickers add custom flare and help align cables to the LED indicators - Includes power cord and six charging cables: 3x USB-C and 3x USB-micro

- Replacement mounting straps for Sunlite lights - Choose specific model to fit your light

- Mounts Beamer and Blaze 1/2W lights to a helmet - Compatible with Beamer 1, Beamer 3, Beamer 5, Blaze 1/2W and Blaze 2W Micro, Blaze 140 SL, Blaze 180 USB - Increased weight and length of Blaze 300, 500, and 650 USB lights may cause awkward mounting on helmet

The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Whether it be your favorite downhill/MX style helmet or explore the versatility of your Lumina head light by mounting it onto an industrial hard hat making it the ultimate work light! System Compatibility - Lumina Series - MiNewt Mini Series - Mako Series

- Quick Strap mounts, adjusts or removes in seconds without tools - Fits 25.4-35mm handlebars - Compatible with Blazes, Beamers, 1200 and Super Spot

Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts

Bracket for aero seatpost

Updated and more secure clothing clip for mounting CatEye safety lights.

This lightweight bicycle handlebar and accessory mount adapter allows for the perfect placement of your mirror, bell or light. Lightweight and sleek design prevents your handlebar from becoming too cluttered. - Made from hi-tech resin and aluminum alloy - Lightweight accessory holder for handlebar end - Ideally paired with a bell, light or mirror - Works with both road and MTB bars - Minimalist design that does not clutter your bike

- Compatible with seatpost diameter 20mm-36mm - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal - Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis, Superflash Micros and Blinky Safety rear light

Planet Bike's BRT Strap is a small item that provides big visibility. This versatile LED safety band can be used as an arm band, pants keeper, dog collar and anything else you can think of. An included lithium battery provides over 200 hours of run time in either flashing or steady mode.