Write a Review

A set of extra-long replacement wheel straps to enable transport of very large-tire fat bikes. - Fits Thule EasyFold XT bike racks

Protect both your bikes and your pick-up on your next adventure with heavy-duty, adjustable, padded protection. Features: - Flexible padding adjusts across a wide range of tailgates and a large handle opening provides backup camera visibility - Bikes remain securely in place with integrated bike separation and multiple-position strap anchors - Bikes and pick-up trucks are protected during transport with heavy-duty vinyl, adjustable padding - Gear can be stored securely, even while driving, due to the inside-facing mesh pockets Technical specifications: - Dimensions: 59 x 16 x 2.75 inch - Weight: 6.5-pound

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars HYUNDAI - Tucson 5-dr SUV with Normal Roof 2010 - 2015

Easy-to-install foot for Thule Evo roof racks, for vehicles with flush railings. Features - Load carrier feet for Thule Evo roof rack system - Foot installs easily onto vehicles with flush railings - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Secures to vehicle with Thule One-Key locks (sold separately) - Check the Thule Buyer's Guide to find out which roof rack fits your car Technical specifications - Maximum load: 165-pound. Please also check the maximum roof load capacity of your vehicle - One Key System compatible Fits: - Thule WingBar Evo - Thule AeroBlade - Thule SquareBar - Thule ProBar

For those cases where fitment just isn't right. The Hi-Lo is a 2" hitch Extension & Rise/Drop built with Kuat style. It provides 7" or 10" of extension and 2.125" of rise/drop. The Hi-Lo comes with a threaded hitch pin to ensure a tight fit in your receiver. Approved for use with the Kuat NV 2.0, Base 2.0, Sherpa 2.0 and Transfer family.

Premium fork mount roof bike rack for the bike enthusiast with fast and easy mounting for both Thru-axle and standard Quick-release bikes. - Easily mount Thru-axle bikes (9-15mm) and standard Quick-release bikes (9mm). Fits 20x110mm Thru-axle bikes with an additional adapter (sold separately) - Accommodates bikes with disc brakes - Fasten your bike to the fork adapter on the ground for easy mounting - The bike slides into the carrier on a guided track on the fork adapter and clicks into place - Convenient and easy installation of fork adapter for a secure bike fit - The fork mount rack is easy and safe to mount thanks to audible and visual confirmation of correct mounting - Unmount bikes from the rack easily with a release lever - Safe mounting of Quick-release bikes thanks to Thule AcuTight torque limiter knob that click when optimal torque is reached - Locks the bike to the bike rack and the bike rack to the roof racks (locks sold separately) - Easy to switch carrier position from one side of the vehicle to the other

This 53" long ramp, for use with Thule EasyFold XT, makes it easier to load and unload bikes, especially for taller SUV's and vans. Features - Quickly load and unload bikes from taller vehicles by adding this longer ramp (53") to the Thule EasyFold XT - Easily attach the ramp to the Thule EasyFold XT wheel tray using the tongue and groove connection

We've all had a friend like The Dirtbag at some point in our lives. He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.

Sunlite's versatile Bike Block Quick Release Fork Mount is a handy bike mount that you can install in your vehicle, pickup truck bed or on virtually any flat surface. It features a sturdy 9mm-diameter quick release to securely support your 2-wheeler by its fork. And, the Bike Block is made of heavy-duty metal for strength and reliability. Plus, it features a pass-through hole for locking your rig with a cable lock, too.

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars NISSAN - Juke 5-dr SUV with Normal Roof 2011 - 2018

Fat bike skewer and thru axle tube adapters for the Kuat Trio roof rack.

Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight. - Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails - Range of shapes lets you find the precise, secure fit specific to your vehicle - Unique inner and outer clip design delivers exceptional hold - Powder-coated stainless steel provides maximum strength and durability - Sold in sets of four – just one kit sets up your system

Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.

Thule's Foot Packs are the "feet" that attach to your vehicle's roof and allow you to then add Thule crossbars (also called "loadbars"), plus the Thule bicycle mounts and accessories required to carry all your gear (crossbars, mounts and accessories sold separately). All mount without tools, are vinyl-coated so they can't damage your 4-wheeler, and are engineered to hold fast under all conditions. They have wide bases for excellent support no matter how many bicycles you carry, and most are sealed from the elements to protect the internal mechanism.

What happens when you take the most popular trunk rack of all time and expand its vehicle compatibility by 20%? Spoiler Alert: you get the Bones EX. Cultivated in the mind of Italian designer Fabio Pedrini and brought to life in our Wisconsin-based facility, the Bones EX features a unique and game-changing leg. Featuring a leg that gracefully avoids contact with most plastic spoilers found on many of the best-selling sedans, hatch backs and SUVs, the Bones EX now fits 20% more vehicles than its legendary predecessor. And that’s not all. We’ve decked out the Bones EX with premium bike hold downs and a handy strap management system in a shade that never goes out of style. Product Features - Best fit around: fits 89% of the top vehicles sold, including those with spoilers. - VIP Treatment: premium bike hold downs that are easy to use and quick to load. - Clean, Sleek Look: integrated strap management eliminates flapping straps. - Strong & Rust-Free: injection-molded arms and legs keep the rack solid for years to come. - Carries 3 bikes (35lb/bike). - Has the largest vehicle compatibility of any trunk rack on the market – consult the Saris Fit Guide for approved fits. - Unique dog leg fits over most spoilers, including those on popular sedans, hatchbacks and SUVs. - Premium bike hold downs that are easy to use and quick to load. - Integrated strap management system provides clean look and eliminates flapping straps. - Best-in-class ratchet straps speedily fasten bike to the rack. - Strongest frame on the market. - Built with 100% recyclable materials. - Rust-free injection molded plastic. - Articulated rubber feet to protect paint. - Arc–based design separates bikes on different levels. - Patents issued and pending. - Lightweight at 11 lbs.

Premium hanging hitch bike rack providing superior bike protection and multiple size options to fit the needs of two people or an entire family. Features - Superior bike stability and fit with integrated anti-sway that prevents bike-to-bike contact and "disappears" when not needed - Bikes are safe and secure during transport thanks to 7" of spacing between each bike - Quickly attach bikes and easily secure them to the rack using the ratcheting cradle strap - Compact cradle design accommodates wide variety of bike sizes/frame styles - Lock bikes to the rack using the integrated cable lock (lock included) - Easily fold down bike arms when rack is not in use - Convenient access to the rear of the vehicle using the HitchSwitch lever to tilt the rack down - Easy to carry and handle, thanks to integrated grab handle - Quick to install and easy to lock the rack to the vehicle due to the tool-free, SnugTite stinger (lock included) - Easily transfers between 1.25" and 2" hitch receivers Technical specifications - Max number of bikes: 2 - Load capacity: 75 lb - Max bike weight: 37.5 lb - Dimensions: 28.2 x 11 x 37 in - Folded dimensions: 15.4 x 11 x 37 in - Weight: 35 lb - Distance between bikes: 7 in - Carbon frame compatible - Fits 1.25" receivers - Fits 2" receivers - One Key System compatible - Bike lock included - Receiver lock included

- Great for storage or transportation - Alloy construction - Can be mounted vertically or horizontally

The all-new aluminum Sherpa 2.0 resets the standard for user-friendly adventure. Folding tire cradles create an abundance of clearance while Kuat's foot-actuated pivot lever lets you bask in the glory of carrying a bike or eating a breakfast burrito while unfolding your rack at the same time. With features designed around your lifestyle, this lightweight rack is as easy to take off as it is to leave on. - Re-designed pivot with optional foot assist - Semi-integrated bike lock - Front tire ratchet design with an intuitive release - Rear tire cradle features a co-molded strap to protect wheels - Folding front cradle adds space between rack and vehicle - No-tool install with hand tight hitch cam system - Gloss metallic powder available in 3 colors - Low profile arced design delivers an amazing look - 2 Bike capacity up to 40 lbs. each - Holds wheelbases up to 47-inch and tires as large as 3-inch - Increased spacing between bikes to 14-inch - Lightweight platform rack design as low as 32lbs (assembled) - Available in both 2-inch & 1.25-inch hitch sizes

Let Us Do the Lifting If you’re searching for the ultimate bike rack for eBikes, look no further than the Saris Door County. Powered by your vehicle’s 7-pin connection, the Door County is a full-service electric bike rack for electric bikes. Simply turn the key and press a button, and the Door County platform hitch rack effortlessly lifts eBikes into the transport position, and back down again. And when you’re on the road, the Door County keeps the electric vibe going with glowing tail lights, including running, brake and turn signals. As for your precious two-wheeled cargo, the Saris Door County can transport two bikes, up to 60 lb. per bike, and sports integrated locks. The Door County’s unique lobster claw-style bike holds easily adjust to accommodate common electric bike features, such as fenders and down-tubemounted batteries. Ferocious in name only, the Door County’s lobster bike claws are gentle on your bike’s paint and ensure peace of mind as you travel down the road. And when you’re ready to call it a day, the Door County folds for storage and convenient wheels make it easy to roll away. - Full-Service Hitch Rack: raises and lowers bikes with electric lift assist, eliminating the need to manually lift heavy eBikes. - eBike Friendly Bike Holds: unique “lobster claws” securely hold bikes without touching fenders or eBike battery mounts. - Complete Integrated Security: locks the rack to the car and the bikes to the rack, plus tail lights for enhanced visibility. - Roll & Ride: folds for compact storage and maneuvering, while built-in wheels make it easy to roll into place. - For use with 2” hitch receivers only. (Not approved for use on RVs or tow-behind RVs and trailers). Bike Capacity - Carries 2 bikes, up to 60 lb/each. - This rack fits a wheelbase of up to 48". - Compatible with bike tires up to 3". Product Design - Electric platform style hitch rack. - For use with 2” receivers only. (Not approved for use on RVs or tow-behind RVs and trailers). - Electric system raises and lowers bikes with rack-mounted turn-key controls and buttons. - Electric system powers tail lights (running, brake, turn signals) for extra visibility. - Electric system connects to vehicle via 7-pin bladed connection. - Lobster claw-style locks the bike by the frame, ideal for bikes with fenders or eBikes with down-tube mounted batteries. - Integrated locking secures rack to the car, and bikes to the rack. - Tilting feature allows access to rear of vehicle, even when fully loaded. - Rack trays fold inwards for compact storage. - Integrated wheels allow rack to be maneuvered when folded. - Wheel straps are provided for front and rear wheel for extra peace of mind. - 1-year warranty for electronics Product Dimension - Rack weight: 63 lb.

Thule's AeroBlade Edge (Flush Mount) is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles without a factory rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. These flush-mount feet will need a fit kit for your specific vehicle (sold separately).

Thule’s UpRide is a universal upright bike rack with no frame contact, providing fast and secure mounting and maximum frame protection. - Ratcheting wheel strap quickly secures back wheel to tray - Maximum bike weight up to 20 kg. - No bike frame contact is made as the hook securely grabs the front wheel Suitable for bikes with carbon frames - Versatile design accommodates bikes with non-traditional frame designs, rear suspension, and bottle cages - Simple interface for switching carrier from one side of your car to the other - Fits most 20–29” wheel bicycles with tires up to 3" wide (up to 5” with Thule UpRide Fatbike Adapter, sold separately) - Locks the bike to the bike rack and the bike rack to the vehicle (locks sold separately)

Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 150cm / 60 in

Easy to move rack to/from vehicle without any lifting, this wheeled dollie attaches quickly t- most 2" receiver compatible racks - Wheels ensure smooth and effortless transport of rack to/from vehicle without any lifting - Connects to 2" stinger with simple pin - Works with most Saris hitch racks and other racks that bolt t- vehicle receiver - Easy to remove

- Great for storage or transportation - Can be mounted vertically or horizontally - Alloy construction

The Original Pickup Truck Bike Hauler Pad For Traditional Tailgate Designs Trailhead commute or gravity-shuttle duty, no bike rack compares to the convenience of a Dakine Pickup Pad. The Large model works best on traditional full-size tailgate designs and has tie-downs for up to seven bikes. The Small fits traditional midsize truck tailgates and has tie-downs for up to five bikes. A built-in security grommet lets you lock it to your truck. We've stiffened the ends of the webbing straps for easy installation under the tailgate and added cam-action buckles for quick removal. - 2 Year Limited Warranty - Padded tailgate protection - Works best on traditional tailgate designs - Individual bike anchor straps (7- Large; 5- Small) - Three web cinch straps - Access flap for tailgate handles - Cable lock compatible - Reflective logo - 1000D Recycled Polyester with UV/weather-resistant coating Dimensions: - Small: 54" (137cm) width for mid size trucks - Large: 60" (152cm) width for full size trucks

Secure and easy-to-use roof-mounted front wheel holder keeps muddy and bulky wheel out of the trunk. - Fits quick-release wheels out of the box and thru-axle wheels with adapter accessory - Fits all wheels from 20" up to 29" and tire size up to 3" - Fits 9mm quick-release bikes - Fits 12-20mm thru-axle bikes with adapter accessory (adapter sold as an accessory) - Holder arm can be separated from the base for convenient loading of the front wheel off the car - Holder arm with the wheel installed easily docks to the base - Locks the front wheel to the holder and the holder to the roof rack (locks included) - Ability to fold flat when not in use - Fits most roof racks up to 90mm by around-the-bar solution including Thule SquareBar roof rack with included adapter

Organize and stow your camp kitchen gear with this all-in-one system, simplifying your effort so it’s always ready to grab-and-go. The rugged, road-worthy box can seamlessly attach to the EXO System for smooth transport to your campsite, trailhead, or ball game. Open it up and turn it into a fully functional work station, making it easy to prep, cook, and serve from the same spot. The system can also be expanded with side-mounted tables and a free-standing Leg kit to grow and customize your EXO OpenRange as needed. PRODUCT DETAILS - Connects to the EXO SwingBase or EXO TopShelf in seconds using the included EXO cleat system - Durable rotomolded enclosure with a rubber door seal keeps your gear fully protected from weather, dust, and critters - Fold down front door allows easy access to your gear and can be used as a prep surface - Internal shelf and integrated utensil drawer help to organize your cooking and camp gear - 85 liters (90 quarts) of internal storage space - Includes SKS locking latches to secure your gear - Tool-free, locking SpeedKnobs attach and lock EXO OpenRange to EXO SwingBase or EXO TopShelf - Includes a lantern hook, backboard organizer and handheld bottle opener - Full suite of accessories available to expand your EXO OpenRange - EXO SwingBase and EXO TopShelf recommended but not required for transport - Made in the USA PRODUCT SPECS - Weight: 37.00 lbs. - Dimensions: L 31.00 in x W 18.00 in x H 18.00 in - Limited Lifetime Warranty

A Convenient Two-Bike Half-Pad Design For The Trailhead Commute The beauty of the tailgate pad is in its simplicity. Just load and go. The Pickup Pad Halfside takes the simplicity one step further. It covers just half the tailgate and fits any pickup. It offers space for two bikes with all the same padding, tie-down features, and security grommet as our full-size pickup pads. The design leaves your tailgate handle and backup cameras clear for use. - 2 Year Limited Warranty - Padded tailgate protection - Half-size pad won't cover handles or rear-view cameras - Works best on all tailgate designs - Two individual bike-anchor straps - Two web cinch straps - Cable-lock compatible - Reflective logo

Easy-to-install foot for Thule Edge roof racks, for vehicles with raised railings. - Easy-to-install roof rack feet - For vehicles with raised railings - For Thule Edge roof rack systems - For raised railings Features: - Load carrier feet for Thule Edge roof rack system - Foot installs easily onto vehicles with raised railings - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Rubber lining protects the surface of the raised railings - Secures to vehicle with Thule One-Key locks (sold separately) - Check the Thule Buyer's Guide to find out which roof rack fits your car

Saris' Traps Wheel Holder mounts easily to your Saris Single or Triple Track (each sold separately) to keep your front wheel secured. It accepts the wheel with little or no quick-release adjustment. Mounting hardware is included.