Write a Review

- Nutted aluminum BMX hubs with cutout flanges for aesthetics and weight savings - Sealed bearing for improved performance and longevity - Use: Rear - Gears: Flip/flop singlespeed freewheel - Drilling: 36H - Axle: 3/8-inch - Material: Alloy - Brake Type: Rim - OLD: 110mm

Greenfield's Stabilizer Rear-Mount Kickstand attaches to the rear chainstay of the bicycle so it's perfect for bikes that won't accept regular kickstands like mountain bikes. It comes complete with an extra wide rubber foot for superior stability and won't interfere with pedal action or rear derailleur cables. This is the stand of choice for law enforcement bike patrols throughout the U.S. - Fits tube sizes up to 7/8" in diameter - Certified Non-Corrosive Casting - Snap Action Mechanism - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over)

The No.7 6F is our take on a modern performance drop bar. Sleek, ergonomically designed curves end in a wrist-friendly 6-degree flare at the drops. This gives just enough space to open your chest and provides forearm clearance in the drop position. This modern design offers seamless transitions between positions. The 6F features a slightly deeper drop than our 12F and 24F handlebars. Available in a complete size range so you can dial in your fit.

Clipless-compatible mountain biking shoes for gravity-fueled riding. Seek out epic new descents or muscle through rough terrain. These adidas Five Ten Hellcat Mountain Bike Shoes provide all-conditions comfort and precision geared towards enduro and downhill rides. They're wide and stiff enough to give a controlled-pedal feel plus durable and impact-resistant. Riding clipless or flat, they offer the grip to power down your line. This product is made with recycled content as part of our ambition to end plastic waste. 20% of pieces used to make the upper are made with minimum 50% recycled content. SPECIFICATIONS - Regular fit - Lace and hook-and-loop closures - Coated leather upper - Molded sockliner - Stealth Marathon rubber outsole - Clipless-compatible - Imported

Increase your hydration capacity with Origin-8's HydroRail Double Seat Bracket. This bracket mounts to your saddle rails and holds two bottle cages. And, the angle is fully adjstable so you can customize it to keep your bottles within easy reach. Bottles and cages sold separately.

Marlin 6 is the perfect ride for progressing your skills on the trails. Its updated slacker frame geometry makes it easier to control on descents while the upgraded suspension fork takes the edge off bumpy trails. Integrated rack and kickstand mounts make it easy to add accessories to this versatile steed. It's right for you if... You want a trail bike that's dialed for building confidence on the dirt, and versatile enough for commuting to work or school. The tech you get A lightweight aluminum frame with modern trail riding geometry and internal routing that keeps cables protected and keep the bike looking sleek. A 100mm RockShox Judy front suspension fork that cushions rocks, roots, and bumps in the trail, 10-speed fuss-free Shimano CUES shifting, and the serious stopping power of hydraulic disc brakes. The final word Marlin 6 is an ideal trail bike for riders who want to progress on the dirt and want a bike that can keep them rolling off of the trail, too. Why you'll love it - Marlin Gen 3 gives you serious trail capability, with big tire clearance and slack, confidence-boosting geometry that keeps you stable from singletrack to city - Its RockShox fork gives you 100mm of suspension for turning rocks and roots in the trail into smooth-sailing - Rack and fender mounts make it easy to accessorize, so your mountain bike can double as a rugged commuter - Internal routing makes it easy to add a dropper post that lets you lower your saddle on the fly for more confident descending - Marlin models in sizes XXS and XS have a curved top tube and lower standover height that makes it easier for smaller riders to mount and dismount Features: Will my bike have a curved top tube? Smaller frames have a top tube that dips down as it approaches the seat tube. This design makes for a lower standover height, which is good for shorter riders because it allows them to straddle their bike more easily. Larger frame sizes have a straight top tube because taller riders with longer legs typically don’t have the same issues with standover height. Fit for every rider Marlin comes in seven frame sizes to suit riders of any height, and Smart Wheel Size ensures you’re on the fastest wheel that fits. The smallest sizes even come with short-reach brake levers and narrower handlebars that give smaller riders better comfort and control. High-tech, high-value Marlin looks and feels great. It’s packed with features usually found only on more expensive bikes, like a stylish frame with internal shift cable and brake hose routing, which can help your cables last longer by protecting them from the elements. Shimano CUES Inspired by rider demand for trouble-free drivetrain longevity and performance, Shimano CUES offers a new foundation for versatility and durability across a range of both electric and standard bikes. CUES features Shimano’s new LINKGLIDE drivetrain technology for significantly increased life on wear items like chains, cassettes, and chainrings. Shimano LINKGLIDE LINKGLIDE technology has been specifically engineered for incredible durability while still delivering smooth and decisive shifting – along with a great pedaling experience. Available exclusively on Shimano CUES drivetrains. Upgrade your pedals and love your bike more Pedals are two of the five touchpoints that connect you with your bike, and even though this bike comes with a pair, upgrading to pedals that boost control and grip will greatly improve your ride. See the pedal guide and find the best pedals for your riding style. We recommend flat pedals for simple versatility. Wheel size: - Size XX-Small: 26-inch - Sizes X-Small – Small: 27.5-inch - Sizes Medium – XX-Large: 29-inch

We designed the Confluence Apex 1 to be the best gravel e-bike for squeezing more adventure into each day. With a lightweight MAHLE hub-drive system putting out 40Nm of torque, it’s just the boost you need to head out for that lunch ride you deserve or that extra spin when your legs are feeling weary. Confluence’s aluminum frame and carbon fork are designed around a geometry that puts you in a comfortable and stable position — especially important for putting in more miles at higher average speeds. Our on-bike cargo features let you bring all you need for those extra miles, and the e-assist lets you overpack without worrying about the weight penalty. Rounding it all out is SRAM’s Apex 1 drivetrain, delivering plenty of reliable gear range for wherever you point it. Charge Your Adventure with Confluence Apex 1. Features: - 6061-T6 alloy frame Confluence’s aluminum alloy tubing is developed specifically for the Confluence frame and is heat-treated to T6 alloy standards for extra strength and durability. - Carbon fiber fork The Confluence Carbon fork is lightweight, comfortable, cargo-ready, and gives you loads of tire clearance to play with. - MAHLE X35+ Class 1 hub-drive system This Class 1 rear hub-drive motor delivers electric assist up to 20mph/32kph. It’s one of the lightest e-bike systems on the market, and its low-profile appearance means that Confluence looks like a regular gravel bike. - 40Nm max torque Up to 40Nm of assist that feels natural, not overwhelming. The MAHLE X35+ system offers three assist levels, and sensors detect when you’re pedaling to moderate the level of support generated at the hub. - 250Wh internal battery You can’t see it, but you’ll certainly feel it. MAHLE’s 250Wh battery is nestled inside Confluence’s downtube. This battery size hits the ideal combination of efficiency and weight for what we designed Confluence to do. - Capable of up to 458Wh with MAHLE Range Extender battery? (sold separately) Easily increase your range for bigger adventures with a Range Extender battery available from MAHLE. - iWOC One compact remote top tube controller Minimal and intuitive controller displays battery status and allows you to cycle through assist modes with one button. - Connected if you want to be The MAHLE system offers Ant+ connectivity for third-party devices and Bluetooth® for app integration. MAHLE’s MySmartBike app allows for customization, metrics, mapping, and more. - Massive 700c x 50mm tire clearance Confluence fits up to 700c x 50mm tires, so you can ride those lesser-traveled tracks. 700c x 42mm maximum tire clearance when equipped with fenders. - On-bike cargo features Attach front and rear racks to your Confluence for serious cargo capacity, or use the sleeker Three-Pack mounts for extra water bottles or our EXP Series Anything Cage HD to pack a cooking kit, extra layers, or whatever dream up.

Lightweight, removable fender intended for MTB use - Adjustable rubber straps make installation quick and easy - 100 percent recyclable polypropylene

The Campagnolo EKAR Crankset is a lightweight and efficient 1x13-speed crank designed for gravel riding and racing. - The 2-piece crank features a strong and durable 630-grade steel alloy crank axle mated to a lightweight carbon fiber spider and unidirectional carbon fiber arm - Must be used with a Campagnolo Pro-Tech bottom bracket - Chainring features a narrow-wide tooth design for efficient drive and maximum chain security - Easy access to external crank bearings - Easily interchangeable alloy rings – no need to disassemble the crankset - Narrow Q-factor – 145.5mm Specifications: - Number of Chainrings: Single - Spindle Interface Type: Campagnolo Ultra-Torque - Chainring BCD: 123 - Pedal Spindle: 9/16" - Drivetrain Speeds: 13

- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact

ABUS Racer 6412 Keyed lock is pre-coiled and includes a bracket for easy transport. The 12mm plastic-coated cable is sufficient for lower crime areas. - 12mm thick steel cable - Plastic coating to prevent damage to the bicycle's paint

- Extends pedals - Not for use on exercise bikes

Grab the right tube for your 700C tire, just choose the valve length and tube size! When it comes to valve length: - 40mm valves are ideal for 10mm—30mm deep rims. - 60mm valves are ideal for 30mm—50mm deep rims. - 80mm valves are ideal for 60mm deep rims. And for tube size: - Check your tire's sidewall to determine its size—then choose the tube whose range includes it! For example: a 700Cx28 tire will work with the 700Cx25-32 or 700Cx28-32 tubes.

• Forged aluminum seat clamp • Chromoly integrated QR seat binder bolt • Increased durability and clamping force

Gnarwolf Chainguide

This graphic tee celebrates Q's heritage and progress with a nod to the year the company was founded and our B Corp status. - Material: Cotton

The Volt is our most popular mountain saddle. Shaped for speed and comfort, time tested and proven, the Volt makes for an incredibly versatile saddle that has gained endless acclaim among riders. - Medium padding thickness and subtle curves make the Volt our most popular mountain saddle - An upward curved tail and gentle drop to the nose provide something to push against while pedaling - Titanium rails

At home on singletrack trails and gravel - Aggressive gravel tire - Optimal for off-road touring and adventures - Tubeless Ready (TR) The Ravager is a gravel tire for the riders out there willing to brave aggressive terrain with only their drop bars and a tiny amount of rubber beneath them. While other tires are designed to let you ride beyond the end of the road, the Ravager opens up new line choices, camping spots, and epic adventures where no road ever existed. Raised, square-edged center knobs provide climbing and braking traction on moon dust-covered trails, and oversized cornering knobs keep you and your gear out of the dirt to conquer another turn.

More fun with more flow Climb to new heights, roam further, and rider harder in the Foray Mountain Shoe. An undeniably comfortable off-road cycling shoe featuring a Boa IP1 dial for a superior fit on rides of any length and intensity. No matter where or how you ride, this shoe won't quit thanks to a stiff sole with a durable upper with the added protection of GnarGuard for an overall reliable trail shoe. - inForm Race last offers a slightly roomier, high-performance fit - Nylon composite Bronze Series sole provides stiff yet walkable performance - Single Boa L6 dial allows easy and precise fit adjustments - Tachyon rubber outsole allows great grip in all terrains - Stiffness index 6 of 14 - Durable, GnarGuard rubberized coating protects against abrasions and fights debris - Compatible with 2-bolt SPD-style cleats

Origin-8 understands that a bike isn't just about utility — it can also be rolling art. Their Classique Tour Handlebar mixes style and function in a swoopy 6061-aluminum shape. With a heads-up 25mm rise and wrist-friendly 15-degree sweep, it's comfortable to pedal, and beautiful to behold.

Never Settle. Whether you're shredding trails or sending it big on the track, the performance and quality will withstand your best efforts with this modest glove. Give it your all. - Embossed ergonomic slip-on cuff tailored to accommodate training watch - Nylon/Spandex top hand provides comfort and flexibility - Single-layer Clarino palm - Stretch finger gussets - Silicone-printed palm and fingers improve grip and lever traction - Integrated tech-thread keeps you connected with your digital device

WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch.

Procaliber Alloy Frameset is the perfect launching pad for your next cross-country bike. It rolls the fine line between race-ready and pocket-friendly with modern geometry that's made for handling fast corners, and lightweight Alpha Platinum Aluminum that's tough, nimble, and ready to cut loose. Designed for a 120mm fork, this ride is ready to build up into your dream steed. IT'S RIGHT FOR YOU IF… You're ready to start your dream cross-country bike from scratch, and want a lightweight and durable frame that doesn't break the bank. You need nimble handling, but don't want it at the cost of stability through the rough. THE TECH YOU GET A lightweight Alpha Platinum Aluminum hardtail frame with modern XC geometry and 148mm boost spacing for stiff support under power. Designed for a 120mm suspension fork. THE FINAL WORD The Procaliber Alloy Frameset lets you ride the line between performance and price with modern XC geometry that keeps you cool through the rough and ready to hammer up climbs. Ready to rip with your dream bike build. WHY YOU'LL LOVE IT - You get modern geometry that keeps you in the attack on climbs and crushing confidently on descents - It balances the accessible price of an alloy hardtail with the performance of its carbon cohorts - You can roll with up to a 120mm fork to get total trail capability - You get to doll it up with all your favorite parts - Internal cable routing keeps your ride quiet, reduces maintenance, and looks sleek

Ergonomic silicone grips from Wolf Tooth. - Multi-position ergonomic design - Unique design increases grip and comfort while climbing

Loose ball bearings in bags or bottles. - Replacement loose ball bearings

- Bar end plugs - Sold in pairs

Shimano Hydraulic Disc Brake Fluid - Non-corrosive mineral oil that offers excellent heat expansion properties - Mineral oil will not absorb water from the air - Not caustic and is non-toxic

- XT M8130 12 speed crankset - Fits 157mm SuperBoost MTB frames - Hollow forged crank maximizes power transfer while limiting weight - Direct mount chainring type (TL-FC41 tool included) - Q-factor: 181mm - Chainline: 56.5mm

This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.

The latest jacket to join the best-selling REFLECT360 range that is now sold in over 40 countries, the REFLECT360 CRS (Color Reflective System) cycling jacket, is the world's first cycling jacket that comes in 6 vibrant colors and looks stylish and unassumingly "normal" by day. But, thanks to our innovative, 100% reflective material, it lights up when caught in a vehicle's headlights at night. This jacket takes innovation in the cycling apparel market to a new level. The REFLECT360 CRS cycling jacket incorporates multiple vents—front, shoulder/back, and underarm. This allows the user to regulate body temperature. By opening the front zipper vents, a "through-flow" is achieved. The air enters the front vents, cools the body, and exits via the shoulder/back vents. During the winter, the vents can be closed and are designed to also be used as extra pockets, if required. These features enable the jacket to be used all year round. The jacket also has an inside chest pocket and large lower back pocket to store an extra layer or a map. About the fabric: The material has millions of tiny reflective beads embedded in the material so when a vehicle's headlights hit it, the beads reflective the light back to the light source, meaning the driver should be able to identify the cyclists further in advance than normal and maneuver appropriately. - High-visibility yellow jacket that reflects a brilliant white when struck by light - Built-in air vents to keep ventilated (front, under-arm, and shoulder/back) - Fleece-lined comfort collar - Adjustable waistband and hook-and-loop cuff - Waterproof with sealed seams and storm zipper - Inside mesh lining for added comfort - Low-profile rear spray guard - Inside chest & back pockets