Other

Keep your bike safely upright and at the ready with the Bontrager Adjustable Bracket-Mount Kickstand. The included hardware and mounting plate makes installation simple, and the center-mount design works with most bikes. Adjustable length adapts for bikes with 24" to 29" wheels and provides a stable upright position. - Center-mount design uses a top plate to clamp the kickstand to the frame near the bottom bracket - Adjustable height fits bikes with wheel sizes ranging from 24" to 29" - Sturdy alloy construction - Includes all required hardware and mounting plates

For riders who are carrying their bike over the tailgate of a truck. Even with a tailgate pad, which is designed to protect the vehicle and not the bike, damage will occur on the downtube when shuttling without protection. The Shuttle Armor is designed to protect the downtube during transport on the roughest access roads. RideWrap protection accessories are made with high-quality RideWrap materials that are bike-tested for long-term durability. All RideWrap protection accessories have been designed to give riders leading protection for their dollar. - Matte black finish - Fits all makes, models, and sizes - Protects from harsh tailgate rub - Designed around mountain bike geometry - Kit includes instructions and pre-install cleaning wipe

- Easy to apply: Simply peel off and install - Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips and damage to your cranks - Durable, weatherproof 3M adhesive - 2-piece pack is designed to fit most cranks

Designed for bartenders, homebrewers, and the kind folks who pour our delicious cold-brew coffee, the Problem Solvers Pedal to Tap Handle Adapter allows thirsty cycling enthusiasts to top their favorite tap handle with the bicycle pedal of their choice. - Works with standard 3/8" tap handles and 9/16" pedal spindles - Two configurations, both labeled with "L" or "R", for compatibility with left and right-hand-threaded pedals - Aluminum construction - 20 TPI

Sunlite's Polo Seat Rail is the right part for mounting Sunlite's Polo Saddles on your favorite bike (Sunlite's Polo Saddles are sold separately and also sometimes called "banana seats"). To install, the seat's clamp fits onto the seatpost and the Seat Rail attaches to the rear wheel axle and the back of the Polo Saddle to support it. The Seat Rail has several mounting positions for getting your saddle in the most comfortable position. This sturdy-steel strut (also called a "sissy bar") boasts a beautiful polished-chrome finish to match your rig's smooth style. The 36-inch model has a built-in backrest that extends above the seat.

Keep your investment protected with durable armor designed specifically for your ride. - Protection engineered to keep your ride looking as good as new for years to come. - Trek protective armor - Model-specific custom fit

Nylon beaded cable ties - 8-inch - Reusable

Converts quill style forks to use threadless stems.

Made of aluminum and embossed with the “Bicycle Tools” label. Dimensions: 26.5 x 6.5-inches

- Three-color, brushed aluminum Park Tool logo sign measures 21" x 11-1/2" and has holes for hanging

Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - For bikes without factory mounting plate (includes top plate and bolt) - 285mm (for bikes 22" and under) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

- Alloy construction - Push button adjustment - Fully adjustable length - -Includes: top plate and 2-bolts (1-hex, 1-Allen)

- Highly reflective sticker sheets that contain a variety of different shapes and sizes of stickers - Perfect for frames, helmets, pads, or anywhere you want to add a bit more visibility

Sip your morning coffee out of this Q-branded ceramic mug. - Volume: 12 oz

You asked for it. This Fork Protector is designed to help prevent scratches from happening to your stanchions. Whether it's from rocks, wear from the adventures of travel, or bug guts during roof rack transportation, this will help protect your fork. - Fits Fork Stanchion size 32-36mm - Fits forks up to 180mm in travel - Weight: 31 grams (pair)

- EverClear Roll is 12 micrometers (µm) thick and offers 2 x 60-inches of high-quality protection film - It's designed to protect your frame against anything from rock chips to cable rubs and everything in-between. - Included is a sheet large enough to cover your down tube, top tube, chain-stay, cable rub points and crank arms. Also works great for fork lowers, shock bodies, and more! Especially great for protecting carbon frames or decals. - It’s easy to cut and apply—simply trace and cut your desired pattern(s), clean your surface, and apply where necessary! - Want to boost re-sale value of you bike? EverClear is your ticket! By applying this stealthy 12µm protection to your frame when it’s new, you can preserve that new look without using any bulky and ugly frame protection. Then, when it’s time to sell, you can remove the EverClear, and you are left with a beautiful like-new bike that’s ready to get top dollar in re-sale. - Made in the USA

Eyebolt and Nut Set for mounting V-Stays to the Bluemels Fenders. Contains 8 stainless eyebolts, 8 stainless nuts and 8 plastic stay endcaps. The set is available in either black or silver finish. This hardware set is included with the fenders, this kit is available as a replacement. - Made in Germany - 11890 Nuts and bolts are black finish - 11891 Nuts and bolts are silver finish

Keep your investment protected with durable armor designed specifically for your ride. - Protection engineered to keep your ride looking as good as new for years to come. - Trek protective armor - Model-specific custom fit

This eyebolt and nut set for fender-mounting contains 8 stainless eyebolts, 8 stainless nuts, and 8 plastic stay endcaps. This hardware set is used for mounting Chromoplastic Longboards, Bluemels, and Commuter II Fenders.

Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over) - For bikes without factory mounting plate (includes top plate and bolt) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA. - For bikes with a factory mounting plate (includes bolt) - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

The Greenfield KS5 is a center-mounted kickstand. The kickstand is constructed from aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Includes extra long bolt - Kickstand can be cut to a specific length - For bikes without factory mounting plate (includes top plate and bolt)

Ride with minimal chain slap by using a Chainstay Protector. Comes in 5 sizes and 4 colors giving you the versatility needed no matter what you ride. Designed and made in our Utah facility, the Chainstay Protector is made with neoprene and sewn with a tight stitch and heavy-duty thread for extra strength and durability. Lizard Skins chainstay guards are the original, strongest and lightest protectors on the market since 1993.

- Designed to fit most lightweight, midweight, and cruiser bicycles - Fits frames with welded-on mounting plates - Made in the U.S.A.

This kit includes a Greenfield center-mounted kickstand as well as a mounting plate that's designed with a cutaway to clear derailleur cables. The kickstand is lightweight, durable, and looks great on any bike. It's made of aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

- Proofide is the only substance that should be used to care for all Brooks Leather Saddles - A new saddle should be treated with Brooks Proofide leather dressing to help assist the breaking-in process - Proofide keeps the leather supple as it is specially formulated from natural ingredients to condition, preserve and shower proof the saddle

Vinyl adhesive decal, perfect for tool boards, vehicles and trailers. Available in black or white. Dimensions: 36 x 4.5-inches

Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 32mm wide x 222mm long - 3 extenders included for desired protection

Keep your handlebar organized and your devices secure with the SpaceMount Clamp from Minoura. - Single action multipurpose clamp fits almost anywhere on the bike - Small: red logo, 22mm–29mm clamp diameter - Medium: black logo, 28mm–35mm clamp diameter - Alloy body and stainless steel lever - Clamp body has one (1) M5 thread hole in center

Nylon cable ties - 8 inches long